Roofing Solutions for Homeowners & Property Managers
SERVICES
RESIDENTIAL.COMMERCIAL.INDUSTRIAL
ASPHALT SHINGLE
Architectural (also known as Dimensional) Shingles and 3-Tab Shingles are the two most popular design choices for asphalt shingles. 3-tab shingles are plain, flat shingles with a consistent shape and size. They use less material and are thinner than Architectural Shingles, making them lighter and less expensive to manufacture and install. They also don't last as long or have Manufactured goods.
CONCRETE TILE
Roof tiles are nailed to the roof's foundation and attached from there. The tiles are normally attached in parallel rows, with each row overlapping the row below it to keep rainwater out and hide the nails that hold the previous row in place. Roof tiles are also available for specific locations, such as where the planes of the various pitches cross. Ridge, hip, and valley tiles are among them. These may be either one or the other.
CLAY TILE
Clay Tiles - The plain clay tile size is 10.5"x 6.5" or 265 mm x 165 mm. These are double lap tiles, which were originally made of clay but are now made of concrete. They're chosen for their aesthetic qualities in general. The colors were created by altering the kiln's atmosphere to produce red, brown, or black.
FLATROOFING TPO
DECK COATING
Deck Coating is a combination of Membranes for concrete and deck. Masonry waterproofing and sealing walkable decks, as well as buildings, are being preserved.
TORCH ROOFING
Modified bitumen is widely used for buildings with a low-sloped roof pitch. The material is made from the same components as asphalt shingles: an organic felt or fiberglass mat saturated with asphalt and covered in granular stone aggregate. 1st Torch On Roofing is a common installation method for commercial properties in North America.
SILICONE COATING
Silicone coating is a fluid-applied roofing membrane that is monolithic and completely adhered. Elastomeric roof coatings, for example, have elastic properties that allow them to stretch and return to their original shape without causing harm.
Paint film thickness (plus or minus 0.075 mm (3 dry mils) to more than 1 mm are typical roof coating dry film thicknesses (40 dry mils). This entails the application of a roof coating.